Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 107 / 282

AirSpeed Multi Stream Configuration
107
d. If using CaptureManager for ingest control, enable it by clicking Yes next to the
“Enable Avid Interplay CaptureManager” field and entering the hostname of the
CaptureManager server in the CaptureManager System Service field.
e. Click Apply.
n
Upon applying the new settings, and if the CaptureManager is enabled, the system will
append a port number to the end of the hostname you entered for the CaptureManager
Server.
For more information, see the topic “Configuring the AirSpeed Multi Stream Device
Service” in the
Avid iNEWS Command and Configuration Guide .
4. Open the Workstation Service for Command and CaptureManager, and change any
desired settings for your specific site. Possible settings that you might want to change
include the following:
a. Enable/disable time sync
b. Enable/disable health monitoring
c. Service Starter Service
5. Launch the Avid Interplay Health Monitor and do the following:
a. Check the AirSpeed Multi Stream’s general health
b. Check Command’s general health
For more information on using the Interplay Health Monitor, see Chapter 7 of the Avid
Service Framework User’s Guide .