Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 102 / 282

3 Configuring the Software
102
Selecting Default Templates
Next, you must setup your default templates that AirSpeed Multi Stream will use for your
site.
To select default templates:
1. Click the Default Templates tab.
2. (Option) For each channel, select the Record and Destination template that best fits your
site’s requirements from the menus.
n
For each channel, the Record drop-down list contains all supported Record templates based
on the video standard (NTSC, PAL, 1080i59.94 or 1080i50) of the channel.
n
Every time you switch the video standard of the channel (for example, from NTSC to PAL, or
from NTSC to 1080i59.94), the Record template is set back to None by default. You have to
reconfigure it.
n
If there is no destination template set for a channel, that channel's capture won't transfer to
shared storage
n
If you select (none) for any channel templates, you need to manually define your codec, and
audio type settings by selecting Edit > Template on a per channel basis in the AirSpeed
Multi Stream application.