Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 85 / 282

AirSpeed Multi Stream Configuration
85
Configuring the Avid Framework Workstation Workgroup
The Avid Framework Workstation was pre-installed on your system with a default
workgroup. This topic describes how to delete the default workgroup, and configure the
Avid Framework Workstation to join the workgroup for your site.
This Avid Framework Workstation contains the following components:
• Avid Diagnostics
• Avid Health Monitor
• Avid Service Configuration
• Avid Workgroup Properties
n
Regardless of whether the AirSpeed Multi Stream is a capture and/or playback server,
ensure it is in the Interplay workgroup. If it is a playback server that will be controlled by
iNEWS Command, it must be configured to join a second workgroup—the same workgroup
as the Command Servers.
n
The AirSpeed Multi Stream device service can be configured to be controlled by up to two
Command systems.
To configure the Avid Framework Workstation on the AirSpeed Multi Stream server:
1. Select Programs > Avid > Avid Framework > Avid Workgroup Properties.
The Avid Workgroup Properties dialog box opens.
2. Select Edit.
The Services Workgroup dialog box opens.
3. Retype the name to the name of the Workgroup that you want the AirSpeed Multi
Stream to be associated with, and click OK.
4. Delete the default workgroup by doing the following:
a. Click on the Lookup tab.
b. Select the default workgroup called “AvidWorkgroup”.
c. Click Remove.
5. Click the Add button.
The Add Workgroup dialog box opens.
n
You can either create a new workgroup or join an existing one. If you are creating a new
workgroup, make a note regarding the workgroup name so that it can be entered during
other Avid Service Framework installations. You must use the same workgroup name on all
Interplay clients that are connected in your network. The workgroup name is case sensitive.