Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 29 / 282

Headframes
29
For best results, do not use unmirrored (unprotected) workspaces. Performance and behavior
is unpredictable.
For more information on protecting workspaces, see your Avid Unity ISIS or MediaNetwork
documentation.
n
For data integrity of your media, Avid recommends that you always use protection to avoid
data loss.
Headframes
AirSpeed Multi Stream supports the display of headframes in Asset Management systems.
Clips transferred to the Asset Management system display headframes.
Playback
You can play back media previously captured by the AirSpeed Multi Stream. Up to four
video streams of media (depending on the format) can be played back at the same time.
Navigation and playback of specific clips is initiated by the AirSpeed Multi Stream user
interface and controlled using the Operational Control buttons.
To playback clips:
1. Load a clip in the AirSpeed Multi Stream user interface.
The clip’s headframe will be shown in the MiniMonitor or the cued window.
2. Press the Play button beneath the Mini-monitor. The Output monitor shows the playback
of the clip.
For more information, see “MiniMonitor Window” on page 146 .
Playout
Once you have edited your media, use the AirSpeed Multi Stream as a playout server. The
AirSpeed Multi Stream allows you to play out up to four channels at the same time. In an
Avid iNEWS environment, or when using a MOS-enabled newsroom system, use the Avid
iNEWS® Command application. For information on controlling clips on the AirSpeed Multi
Stream, see the
Avid iNEWS Command User’s Guide .