Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 272 / 282

D Regulatory and Safety Notices
272
Class A Equipment
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at
personal expense.
Modifications
The FCC requires the user to be notified that any changes or modifications made to Avid
hardware that are not expressly approved by Avid Technology may void the user’s authority
to operate the equipment.
Cables
Connections to Avid hardware must be made with shielded cables with metallic RFI/EMI
connector hoods in order to maintain compliance with FCC Rules and Regulations.
LED Safety Notices
Avid hardware might contain LED or Laser devices for communication use. These devices
are compliant with the requirements for Class 1 LED and Laser Products and are safe in the
intended use. In normal operation the output of these laser devices does not exceed the
exposure limit of the eye and cannot cause harm.
Standard to which conformity is declared: (IEC 60825-1:1993+A1:1997+A2:2001)
LED Specifications
• Wave Length: 650 nm
• Output Power: Less than 9.22 uW