Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 55 / 282

Cabling Up the AirSpeed Multi Stream
55
5. Repeat steps 1 through 4 until all drives are installed in the chassis.
Once the drives are installed, you can begin cabling up the AirSpeed Multi Stream for
your site. For more information, see
“Cabling Up the AirSpeed Multi Stream” on page
55 .
Cabling Up the AirSpeed Multi Stream
Once the AirSpeed Multi Stream is securely installed in the rack, and the drives are installed,
you are now ready to connect the appropriate cables to the rear panel of the AirSpeed Multi
Stream to the external devices for your particular site. This section contains the cabling
diagrams and instructions for all AirSpeed Multi Stream models.
The following sections describe the cabling on the rear of the AirSpeed Multi Stream for all
models:
• Connecting SDI and Video Reference Cables
• Connecting Time of Day (TOD) LTC Cables
• Connecting Control and Communications Cables
• Connecting USB Devices (Mouse and Keyboard)
• Connecting Ethernet Cables
• Connecting Remote Serial Cables
NET
TMP
LRM
PGD
LTC
REF
ACT
WNK
500
500
500
500