Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 111 / 282

AirSpeed Multi Stream Configuration
111
Configuring Communication Protocols in AirSpeed Multi Stream
If you have external devices that will control AirSpeed Multi Stream (such as Automation
systems), you can define communication protocols for each channel. The default protocol is
set to NONE.
The Protocol Setup dialog box is used to set up communication with external devices that
control AirSpeed Multi Stream.
The screen example shown below shows the Protocol Setup dialog box for an MPEG-2 HD
model AirSpeed Multi Stream. For an SD and DNxHD model, only 4 channels display in the
dialog box.
Protocol Setup Settings
Setting Description
Channel The AirSpeed Multi Stream Channel on which this protocol is
running.
Protocol The name of the selected protocol. Select from:
• NONE (AMS API)
• VDCP (LouthSerial)
• BVW75 (Sony)
Port The AirSpeed Multi Stream port through which this protocol is
running. Each serial connection uses one of the eight RJ-45 serial
ports on the rear of the AirSpeed Multi Stream chassis.