Avaya IP500, Руководство по установке

Страница: 71 / 442

Installing IP500/IP500 V2 Page 71
15-601042 Issue 28c (19 August 2013) IP Office 9.0
Administration Software: Starting IP Office Manager
3.5 Starting System Status Application
The System Status Application (SSA) is a reporting tool that provides a wide
range of information about the current status of an IP Office system. Its can
report the available resources and components within the system and details of
calls in progress. Details of the number of alarms are recorded and the time date
of the most recent alarms.
When required for diagnostics escalation, SSA is able to take a snap shot image of
the IP Office system's status including a copy of its current configuration. Use of
SSA requires an IP Office service user name and password that has been
configured for System Status access in the IP Office's security settings.
To start System Status:
1. There are several methods that can be used to start the System Status Application.
· On a PC where System Status has been installed , select Start | Programs | IP Office | System Status.
·
If IP Office Manager is also installed on the PC and is running, select File | Advanced | System Status.
·
For IP500 V2 controls units, start a web browser and enter the IP address of the control unit. Select the link for
the System Status.
2. Once System Status has started, it will request the details of the IP Office system to which you want it to connect.
· Control Unit IP Address
Enter the IP address of the IP Office control units LAN interface or use the drop down to select a previously
used address.
·
Services Base TCP Port
This should match the Services Base TCP Port setting of the IP Office system, set in that systems security
settings. The default is 50804.
·
Local IP Address
If the PC has more than one IP address assigned to its network card or multiple network cards, the address to
use can be selected if necessary. This allows System Status to be run on a PC that is already running an SSI
connection to the IP Office for the IP Office Customer Call Reporter application.
·
User Name/Password
Enter a user name and password that has been provided for System Status usage. By default this is the same
as the user name and password used with IP Office Manager. This must be the name of an IP Office service
user name that has been configured for system status access in the IP Office's security settings.
·
Auto Reconnect
If selected, System Status will attempt to reconnect using the same settings if connection to the IP Office is
lost.
3. Enter the required details for the IP Office and click Logon.
67