manualshive.com logo in svg

Avaya IP500, Руководство по установке, Страница: 394 / 442

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 394

Installing IP500/IP500 V2

Page 394

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.15.8 EF Port

These ports are found on the ETR6 base card. They are analog trunk ports that are only useable when the card is fitted
with an IP500 analog trunk daughter card. When in power fail, the EF ports are connected to trunk port 12. 

10.15.9 ETR Port

ETR (Enhanced Tip and Ring) ports are provided by the ETR6 base card. They can be used for the connection of DTMF
analog phone devices and Avaya ETR phones. 

·

Paging to external paging equipment is not supported via ETR6 ports. It is supported via POT ports. 

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов