manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 107

Installing IP500/IP500 V2

Page 107

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

Initial Configuration Using IP Office Manager: Changing the Default Passwords

7. Click on the 

 General . The general security settings are displayed in the main display area. 

a. Click on Change and enter a new password for the security administrator. 

8. Click on File | Configuration to exit security configuration mode and return to the IP Office configuration. 

To changing the remote user password:

The IP Office configuration contains a user whose password is used as the default for remote dial in access to the IP Office
network. The password of this user should be changed. 

1.

Start IP Office Manager

 and connect to the IP Office system. 

2. Click on 

 Users and in the list of users click on Remote Manager. 

3. On the User tab, enter a new password for the user and click OK. 

4. Click on the 

 icon and save the updated configuration back to the IP Office system. 

 

70

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды