Avaya IP500, Руководство по установке

Страница: 21 / 442

Installing IP500/IP500 V2 Page 21
15-601042 Issue 28c (19 August 2013) IP Office 9.0
System Overview: IP Office Modes
1.5 Control Units
The base of any IP Office system is the control unit. It stores the system configuration and controls the system operation.
Each control unit can be customized by adding various
base card onto which trunk daughter cards can also be
added. External expansion modules can also be connected to add additional extension and trunk ports.
IP Office Release 9.0 supports the following IP Office control units. Other previous IP Office control units are not supported
by IP Office Release 9.0 and are not covered by this documentation.
· IP500 V2 Control Unit
This control unit has four front slots for IP500 base cards. It has
an internal power supply unit and uses a mandatory System SD
card Feature Key dongle. It includes a 2 port ethernet LAN switch
(layer 3 managed) on the rear.
· The type of System SD card fitted to the system determines
the default
operation mode of the system. The possible
modes are listed below. Some modes require the addition of
licenses:
·
IP Office Basic Edition
·
IP Office Basic Edition - PARTNER® Mode
· IP Office Basic Edition - Norstar Mode
·
IP Office Essential Edition
·
IP Office Preferred Edition
· IP Office Advanced Edition
·
Server Edition
·
IP500 Control Unit
This control unit has four front slots for IP500 base cards. It has
an internal power supply unit and uses a mandatory smart card
Feature Key dongle. It includes a 2 port ethernet LAN switch
(layer 3 managed) on the rear.
·
This type of control unit defaults to IP Office Essential Edition
mode and can support the following modes:
·
IP Office Essential Edition
·
IP Office Preferred Edition
·
IP Office Advanced Edition
26 29
32
211
15
214