manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 211

Installing IP500/IP500 V2

Page 211

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

System Components:  

10.1 IP500 V2 Control Unit

The slots are numbered 1 to 4 from left to right. They can be used in any order. However if the capacity for a particular
type of card is exceeded, the card in the rightmost slot will be disabled. The unit must not be used with uncovered slots. 

Feature

Capacity

Maximum
Extensions

Up to 384 extensions in IP Office standard modes. Up to 100 extensions in IP Office Basic
Editionmodes. 

Conference
Parties

128 as standard but maximum 64 in any individual conference. Silence suppression is applied to
conferences with more than 10 parties.

Trunks Cards

4. Any combination of IP500 trunk daughter cards and up to 2 IP400 trunk cards.

Voice
Compression
Channels

Up to 148 channels using up to IP500 VCM, IP400 VCM and IP500 Combination cards. 

Voicemail
Channels

Maximum 40 usable for Voicemail Pro/TAPI WAV connection sessions subject to available licenses.
For Embedded Voicemail, up to 6 (2 by default, additional channels require licenses).

Locales

Supported in all 

IP Office locales

.

Software Level

IP Office Essential Edition: 6.0 minimum. IP Office Basic Edition - PARTNER® Mode: 6.0 minimum. IP
Office Basic Edition - Norstar Mode: 6.1 minimum. IP Office Basic Edition: 7.0 minimum.  Bin file =
ip500v2.bin. 

Power Supply

Internal power supply unit.

Mounting

Free-standing, rack mounted (requires IPO IP500 RACK MNTG KIT) or wall mounted (requires IPO
IP500 WALL MNTG KIT).

Dimensions

Width: 445mm/17.5". Depth: 365mm/14.4". Height: 73mm/2.9"/2U. Clearance: 90mm minimum all
sides, 220m at front. 

Memory

Maximum configuration file size: 2048KB. 

51

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды