manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 247

Installing IP500/IP500 V2

Page 247

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

System Components: IP500 External Expansion Modules

10.5.4 Digital Station 16A/30A

These modules can be used to add additional 

TCM ports

 for TCM phones, for example M-Series and T-Series phones.

The module is available in 16 and 30 port variants, referred to as the IP500 DS16A and IP500 DS30A respectively. 

The modules use RJ21 connectors; 1 on the 16 port version, 2 on the 30 port version. For TCM connections using RJ45
port, use the 

IP500 DS16B/30B modules

.

 

Feature

Details

Supported on

IP500 V2 only. 

Locales

Supported in all 

IP Office locales

.

Software Level

IP Office Release 7.0 minimum (TCM only). Bin file = nadcpaV1.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable. 

Power Supply

The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific 

IEC60320 C13

power cord

 for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the 

IPO IP500 RACK MNTG KIT V3

.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".

Weight

Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30A RJ21)

Module Front

 

Port
LEDs

·

Green On = Phone detected.

Module
Center
LED

The center LED on all external expansion modules is used to indicate the overall state of the module as
follows:

·

Red flashing = Module starting up/Loading firmware. 

·

Red on = Error. 

·

Green on = Module okay. 

·

Green flashing = Module starting up/Loading firmware (IP500 DS16A/30A module only). 

401

250

51

39

278

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды