manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 430

Installing IP500/IP500 V2

Page 430

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

11.7.4 European Union

1. 999 and 112 calls must not be barred. Doing so will invalidate the approval.

2. All connections at the MDF shall be identifiable by suitable labeling.

3. The CE mark displayed on IP Office equipment indicates the systems compliance with the EMC, LVD, and R&TTE

Directives and common technical regulations for Primary Rate and Basic Rate ISDN.

4. All ports for the connection of other non-telecommunications apparatus have a Safety Extra Low Voltage (SELV) safety

status.

 

11.7.5 New Zealand

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item
complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom,
nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all
respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is
compatible with all of Telecom's network services.

 

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды