manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 252

Installing IP500/IP500 V2

Page 252

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.5.6 Phone 16/30

IP500 Phone modules can be used to add additional PHONE ports to an IP Office system. 

The module is available in 16 and 30 port variants, referred to as the IP500 Phone 16 and IP500 Phone 30 respectively.

Feature

Details

Supported on

IP500 and IP500 V2. 

Locales

Supported in all 

IP Office locales

.

Software Level

IP Office core software level 2.1(36) minimum. Bin file = dvpots.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific 

IEC60320 C13

power cord

 for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the 

IPO IP500 RACK MNTG KIT V3

.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".

Weight

Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)

 

Module Front

 

Module
Center
LED

The center LED on all external expansion modules is used to indicate the overall state of the module as
follows:

·

Red flashing = Module starting up/Loading firmware. 

·

Red on = Error. 

·

Green on = Module okay. 

·

Green flashing = Module starting up/Loading firmware (IP500 DS16A/30A module only). 

51

39

278

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды