manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 356

Installing IP500/IP500 V2

Page 356

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.12.1 201B RIM

The 201B Recorder Interface Module (RIM) is supported for use with 2420 and 5420 phones. It provides the phone with a
3.5mm mini-RCA jack socket for connection of recording devices. It also provides two headset sockets which can be used
in place of the phones existing headset socket (the phone and the RIM sockets can not be used at the same time).

·

The 201B is the RoHS compliant replacement for the 201A. The 20B stand is the RoHS complaint replacement for the
20A stand.

 

To install the 201B, the phones existing stand must be removed and be replace by a 20B stand (also called the 20B
Module Adapter Base). This is an expanded stand that includes two slots, into one of which the 201B can be inserted.
However only one 201B is supported per phone. 

Use of the 20B and therefore the 201B requires the phone to be powered by a 1151D1 or 1151D2 power supply unit. Full
installation instructions are included with the 20B Stand.

Item

SAP Code

201B Recorder Interface Module

700381635

20B Stand

700381650

EU24

Multi-Grey

700381817

1151D1 Power Supply

With CAT5 cable.

700434897

1151D2 Power Supply with battery backup.

With CAT5 cable.

700434905

1151D1/1151D2 Power Cord

USA

405362641

Europe

407786623

Australia/New Zealand

407786631

India

407790991

United Kingdom

407786599

Argentina

408161453

 

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды