manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 266

Installing IP500/IP500 V2

Page 266

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.9.1 Analog Trunk 16

The IP400 Analog Trunk module (also known as the ATM16) is used to add 16 additional analog trunks to an IP Office
system. The module supports both loop-start and, with suitable grounding, ground-start trunks.

·

 WARNING 

In all IP Office installations, any module being used for analog trunk connections must be connected to a 

functional

earth

.

·

 WARNING 

Within the Republic of South Africa and in areas of high lightning risk, any module using analog trunk connections
must be connected to a 

protective ground

 and to 

surge protection equipment

.

Feature

Details

Supported on

All IP Office control units except Small Office Edition. 

Locales

Specific variants are provided for different IP Office locales, see below.

Software Level

IP Office core software level 1.0 minimum. Bin file = naatm16.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a 2-pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the module's DC I/P socket. A locale specific 

IEC60320 C7 power

cord

 for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.

Weight

Unboxed: 2.9Kg/6.6lbs. Boxed: 4.2Kg/9.4lbs.

Module Front

 

44

44

45

39

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды