manualshive.com logo in svg

Avaya IP500, Руководство по установке

Поделиться
Скачать
Avaya IP500 Скачать руководство пользователя страница 47

Installing IP500/IP500 V2

Page 47

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

System Overview: Wall and Rack Mounting

1.12 Feature Keys and Licenses

A feature key is required for licensed features. 

·

IP500 V2 Avaya SD Card

Inserts into the System slot on the rear of an IP500 V2 control unit. This card is required even if not
using any IP Office licenses. 

·

IP500 Smart Card

 

Inserts into a dedicated slot on the rear of the IP500 control unit. This card is required even if not using
any IP Office licenses. 

Various IP Office features and applications require entry of 

licenses

 into the system's configuration. The licenses are

unique 32-character codes based on the feature being activated and the serial number of the 

feature key dongle

installed with the IP Office system. 

The serial number is printed on the feature key dongle and prefixed with SN (IP500) or FK (IP500 V2). It can also be
viewed in the system configuration using IP Office Manager. 

·

For IP500 and IP500 V2 systems, the feature key dongle takes the form of a card (smart media or SD card
respectively) inserted into the control unit. The card is a mandatory item for these systems even if they use no
licensed features. 

 

When a license is entered into the IP Office configuration, the following information is shown.

·

Status 
The status, which is Unknown until the configuration file is sent back to the IP Office system. 

·

Unknown 
This status is shown for licenses that have just been added to the configuration shown in IP Office Manager.
Once the configuration has been sent back to the IP Office and then reloaded, the status will change to one of
those below. 

·

Valid 
The features licensed can be configured and used. 

·

Invalid 
The license was not recognized. It did not match the serial number of the Feature Key.

·

Dormant 
The license is valid but is conditional on some other pre-requisite that is not currently meet. 

·

Obsolete 
The license is valid but is one no longer used by the level of software running on the system. 

·

Expired 
The license has gone past its expiry date. 

·

License 
The name of the licensed feature. This may differ from the ordered RFA name.

·

Instances 
Depending on the license, this may be the number of ports enabled or number of simultaneous users of the
licensed feature. Sometime the number of instances is specified in the license name.

·

Expires 
Most purchased licenses have no expiry setting. For some features, trial licenses may be available which will have
an expiry date.

254

256

402

254

Содержание IP500



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды