Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, Руководство пользователя

Страница: 530 / 1304

Enter the starting sequential number (alpha, numeric, or
alphanumeric) for the drawing. If you enter the same Sequential
starting sequential number for every drawing of your wiring
diagram set, AutoCAD Electrical confirms at insertion time
that a new sequential wire number tag is not repeated on
any other drawing.
If you set DEMO1 to 100 and DEMO2 to 200, the wire
numbers on DEMO1 start at 100 and those on DEMO2
start at 200. If DEMO1 has more than 100 wire numbers
it starts using wire number 200 and above while DEMO2
would begin its wire numbers where DEMO1 left off
(making sure that duplicate wire numbers are not assigned).
The default is "1." Setting it to "2" with a starting sequential
of "1" would yield wire numbers 1, 3, 5, 7, 9, 11, and so
on. Increment
Sets the wire number tag suffix. This list is used to create
unique reference-based wire number tags for multiple wire Line Reference
networks beginning at the same reference location (such
as wire network beginning at a location per line reference
number, X-Y grid reference, or X-Zone reference).
Displays a suffix list. List suffix characters for wire numbers
beginning on the same line reference or in the same zone Suffix Setup
(to keep wire numbers unique). Select one of the 4 pre-
defined suffix lists or enter your own custom suffix list.
New Wire Number Placement
NOTE The Insert Wire Number tool does not take the current wire number setting
(in-line, above or below) into account when updating existing wire numbers; this
setting is used only when inserting new wire numbers. Use the Toggle Wire Number
In-Line tool for flipping existing wire numbers among the 3 modes.
Places the wire number above the physical wire. Above Wire
Places the wire number inline with the wire. In-Line
518 | Chapter 8 Wire/Wire Number Tools