Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, Руководство пользователя

Страница: 1192 / 1304

This utility can help you troubleshoot problems with unconnected or shorted
wires and invalid wire crossing gap pointers.
1 Click the arrow on the Insert Wire tool to access the
Check/Trace a Wire tool.
2 Click the Check/Trace a Wire tool.
3 Select a wire on the network. You can select "A" to show All
Segments. If you prefer to step through wire by wire, press the
spacebar.
4 Determine whether to pan or zoom the selected wire.
The connected wire segments endpoints are shown in the
command prompt area.
Check multiple wires
1 Select Projects
➤
Reports
➤
Drawing Audit from the menu.
2 Select whether to process the active drawing or the entire project, and
click OK.
3 Indicate which areas to check for errors. You can look for problems related
to missing wires which were connected through gap pointers, clean up
wires pointing to nonexistent wire numbers, erase wire numbers that are
not linked to a wire network, and draw a red outline around each wire
entity.
4 Click OK.
The Drawing Audit utility displays a report of wire-related clean-up
functions that were performed.
Electrical audit
This utility identifies problems that affect the active project. When you run
the command, the progress bar describes the progress of the audit process.
Once the audit is complete, a text box displays the total number of errors
1180 | Chapter 18 Miscellaneous Tools