Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, Руководство пользователя

Страница: 203 / 1304

Parametric Twisted Pair symbols
Description Attribute
Pair of invisible wire connection attributes where the wires
connect. Connection is made to each attribute's origin X?TERM01
point. The "?" character position in each attribute name
identifies the wire connection direction:
■
1: wire connects to the attribute from the right
■
2: wire connects to the attribute from above
■
4: wire connects to the attribute from the left
■
8: wire connects to the attribute from below
Visible attribute, very small, single character value (a ".")
that must remain visible and must be placed at the exact X?_TINY_DOT_DONT_REMOVE
insertion location of each of the XnTERM01 attributes. This
attribute is needed to allow the gap to auto-adjust to text
width and to maintain connectivity through the symbol if
the in line label or wire number text is blanked or grows
small compared to the total gap width in the wire.
Invisible attribute that carries the vertex offset distance
measured from the midpoint of the symbol's two wire ACE_OFFSET
connection points. A positive value increases the total dis-
tance between the vertices (of the two symbols making up
the twisted pair symbol). A negative value decreases this
distance. A value of 0.0 means that the vertex location is
at the symbol's midpoint.
Invisible attribute set to a value of 3 to identify a twisted
pair symbol (1 characters maximum). ACE_FLAG
Schematic Attributes | 191