Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, Руководство пользователя

Страница: 133 / 1304

Defines spacing between the inline wire number and the wire it-
self. Gap Setup
Places the wire number below the physical wire. Below Wire
Specifies to insert the wire number tags the specified offset dis-
tance. Offset
Specifies to insert the wire number tags in the center of each wire
segment. Centered
Specifies a fixed, user-defined offset distance from the left or top
of the first wire segment found on the wire network. Offset Distance
(This option is unavailable for in-line wire numbers.) AutoCAD
Electrical places wire numbers on leaders when it determines that Leaders
the wire number text bumps into something (it does not check
if the leader itself will overlay another object). Select the method
for inserting new wire numbers as leaders: As Required, Always,
or Never.
NOTE This change does not affect wire numbers that are already
present on the drawing.
Drawing properties: cross-references tab
Apply a drawing-specific cross-reference settings that are maintained inside
the drawing’s WD_M block. This overrides the project settings since
cross-referencing commands look at the WD_M block as the definition for all
referencing on the drawing during run-time.
Access:
Click the Project Manager tool. In the Project Manager, right-click the drawing
name, and select Properties
➤
Drawing Properties.
From the Projects menu, select Project
➤
Project Manager. In the Project
Manager, right-click the drawing name, and select Properties
➤
Drawing
Properties.
Overview of project and drawing properties | 121