Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, Руководство пользователя

Страница: 167 / 1304

(for example, RED_* selects all layers that begin with
"RED_").
Removes the selected layer name from the wire type
grid. The layer is no longer a valid wire layer, however Remove Layer
the layer remains in the drawing as an AutoCAD line
layer.
If multiple layers of one color exist in the drawing,
you must select all layers of that color in the wire
type grid to activate this button. For example, if there
are multiple RED* layers such as RED_AWG18,
RED_AWG20,and RED_AWG25, you must select all
3 layers in the wire type grid to enable the button.
NOTE Only unused layers in the active drawing can
be deleted.
Makes the selected layer the default layer for new
wire layers and displays the layer name in the dialog
box. Mark Selected as Default
OK
NOTE This is available only when one wire type record is selected in the list.
Makes the selected wire type the current wire type. If the selected wire type
does not already exist on the drawing, the wire layer is created on the fly and
the wire layer name and properties are saved in the drawing file. In order for
the layer to be created the following rules apply:
■ The layer name must be unique
■ The layer name cannot be left blank
■ The layer name cannot contain special characters such as / \ " : ; ? * | , = '
> <
Use wire layers | 155