20
Bluetooth Connection
Bluetooth pairing is recommended as the first choice for the communication between the
tablet and the MaxiVCI Mini. The working range for Bluetooth communication is about 33
feet (about 10 m), enabling remote vehicle diagnostics.
More than one MaxiVCI Mini to connect to the test vehicles, you can perform vehicle
diagnosis on various vehicles conveniently by pairing the tablet separately to each of the
MaxiVCI Mini devices connected to the different test vehicles via wireless BT. Without
the need to repeat the plugging and unplugging procedure which is unavoidable through
traditional wired connection, Bluetooth connection saves you more time and provides
higher efficiency.
USB Cable Connection
Use the provided USB cable to connect the tablet to the MaxiVCI Mini. A green check
will display atop the VCI navigation button at the bottom bar of the screen and the
MaxiVCI Mini Connection LED will light solid green when connection between the devices
is successful.
NOTE
The USB communication method will take priority over Bluetooth communication if both
are enabled.
No Communication Message
A
If the tablet is not connected to the MaxiVCI Mini correctly, an
“Error” message may
display. This indicates that the tablet cannot access the vehicle control module. In
this case, please do the following check-ups:
Check if the MaxiVCI Mini is powered up.
Check if the MaxiVCI Mini is properly positioned.
Check if the Connection LED on the MaxiVCI Mini is illuminated for Bluetooth
or USB.
In case of Bluetooth connection, check if the network is configured correctly, or
if the right MaxiVCI Mini has been paired up with the tablet.
If during the diagnosis process, the communication is suddenly interrupted
due to the loss of signal, check if there is any object that causes signal
interruption.
Try standing closer to the MaxiVCI Mini to obtain more stable signals and
faster communication speed.
In case of USB connection, check the cable connection between the tablet and
the MaxiVCI Mini.
Check if the Power LED on the MaxiVCI Mini is flashing red and if so, it indicates
there is a hardware problem with the MaxiVCI Mini, in this case, contact