85
OBDII-Assisted Relearn
The MX808TS also can perform an OBDII-Assisted Relearn. Some vehicles relearn
procedure require that a tool be connected to the vehicle while another tool be used to
trigger the sensor at the wheel.
Since the MX808TS tablet wirelessly communicates with vehicles, it can be used to
trigger wheel-mounted sensors while still being connected with the vehicle eliminating
the need for a second tool. The sensor IDs are then relearned to the vehicle.
After performing the Relearn procedure, tap
Clear DTCs
to clear the trouble codes
present in the TPMS ECU.
TPMS by OEM Part No.
If the sensor's OEM part number is known, this function is an efficient method to activate
and program MX-Sensors.
Application Scenarios
The following are two typical scenarios in which this method is ideal.
In the workshop
If the mounted sensor is faulty and the part number is known to the technician, the
technician can use this method to Check the original sensor, and then write the
information that was retrieved into a new MX-Sensor via
Programming.
The newly
programmed MX-Sensor is ready to replace the original sensor and be installed on the
vehicle.
In the tire shop
If a customer needs to replace one or more tires and sensors , or purchase a large
amount of sensors for one vehicle model and the OEM part number of this model is
known, this function can be used to program up to 20 sensors at the same time.
