37
be triggered automatically at preset threshold value or values may be set manually.
The triggering mode and record duration can be configured in the Setting mode of
Live Data.
Freeze
— displays the retrieved data in freeze frame mode.
Previous Frame
— displays previous frame of the freeze data.
Next Frame
— advances to the next frame in the freeze data.
Clear Data
— clears all previously retrieved parameter values at a cutting point.
To Top
— moves a selected data item to the top of the list.
Graph Merge
— tap this button to merge selected data graphs (for Waveform Graph
Mode only). This function is useful for comparison between different parameters.
NOTE
In this mode, Graph Merge can only display up to three parameter items.
To cancel Graph Merge mode, tap the drop-down button on the right side of the
parameter name, and select a data display mode.
Show
— tap this option to switch between the two options; one displays the selected
parameter items, the other displays all the available items.
Setting
— tap this button to access setting menu to set the trigger mode, recording
duration and threshold values for data recording, and define other control settings.
There are four navigation buttons on top of the
Setting
mode screen.
Selected Button
— displays the configuration screen to set the threshold values, an
upper limit and a lower limit, for triggering the buzzer alarm
.
This function is only
applied to the Waveform Graph display mode.
a) MIN
— tap to display virtual keyboard and enter the required lower limit value.
b) MAX
— tap to display virtual keyboard and enter the required upper limit value.
c) Buzzer Alarm
— switches the alarm on and off. The alarm function makes a
Figure 4-14
Sample Setting Mode in Live Data
