45
5
Service
The Service section is specially designed to provide quick access to the vehicle systems
for various scheduled service and maintenance tasks. The typical service operation
screen is a series of menu driven executive commands. Follow on-screen instructions to
select appropriate execution options, enter correct values or data, and perform
necessary actions. The application will display detailed instructions to complete selected
service operations.
Currently, the following service functions are available:
Oil Reset Service
EPB Service
BMS Service
SAS Service
DPF Service
IMMO Service
After entering each special function, the screen will display two application choices:
Diagnosis
and
Hot Functions
.
Diagnosis
enables the reading and clearing of codes
which are sometimes necessary after completing certain special functions.
Hot
Functions
consists of sub functions of the selected special function.
Oil Reset Service
Perform reset for the Engine Oil Life system, which calculates an optimal oil life change
interval depending on the vehicle driving conditions and climate. The Oil Life Reminder
must be reset each time the oil is changed, so the system can calculate when the next
oil change is required.
IMPORTANT
Always reset the engine oil life to 100% after every oil change.
NOTE
All required work must be carried out before the service indicators are reset. Failure to
do so may result in incorrect service values and cause DTCs to be stored by the relevant
control module.
