72
To connect the MaxiVCI Mini to the test vehicle, insert the Vehicle Data Connector on
the MaxiVCI Mini into the vehicle
’s DLC which is generally located under the vehicle dash
and the MaxiVCI Mini will be automatically powered on.
NOTE
The vehicle
’s DLC is not always located under the dash; refer to the vehicle’s user
manual for DLC location.
VCI Connection
The MaxiVCI Mini Power LED will light solid green when properly connected to vehicle
and ready to establish communication with the tablet.
The wireless diagnostics interface MaxiVCI Mini supports two communication methods
with the tablet, Bluetooth and wired USB.
Bluetooth Connection
Bluetooth pairing is the recommended communication between the tablet and the
MaxiVCI Mini. The working range for Bluetooth communication is about 33 feet (about
10 m), enabling remote vehicle diagnostics.
If you use more than one MaxiVCI Mini to connect to the test vehicles, you can perform
vehicle diagnosis on various vehicles conveniently by pairing the tablet separately to
each of the MaxiVCI Mini devices connected to the different test vehicles via Bluetooth.
Without the need to repeat the plugging and unplugging procedure which is unavoidable
through traditional wired connection, Bluetooth connection saves you more time and
provides higher efficiency.
USB Cable Connection
Use the provided USB cable to connect the tablet and the MaxiVCI Mini. A green check
will display atop the VCI navigation button at the bottom of the screen and the MaxiVCI
Connection LED will light solid green when connection between the devices is successful.
NOTE
The USB communication method will take priority over Bluetooth communication if both
are enabled.
No Communication Message
A.
An “Error” message will display if the MaxiVCI Mini is not connected correctly. To
resolve this issue, please do the following.
Check if the MaxiVCI Mini is powered on.
Check if the MaxiVCI Mini is properly positioned.
Check if the Connection LED on the MaxiVCI Mini is illuminated for Bluetooth
or USB.
In case of Bluetooth connection, check if the network is configured correctly, or