61
3. Tap the corresponding number button to enter new value for each cylinder.
4. Follow the on-screen instructions to tap on the corresponding number
[1] [2] [3] [4]
to enter the new value for the cylinder, restore the old value, and exit after finish the
function.
Particle Filter Regeneration
This function is used to perform the particle filter regeneration.
1. Tap
Particle filter regeneration
from the service functions menu.
2. The tool communicates with the vehicle and reads the fault codes memory. Follow
the on-screen instructions to check the prerequisites before particle filter
regeneration, such as the fuel, the time and driving style.
3. If prerequisites are met, the tool will ask your confirmation to proceed as below. Tap
Request
to begin a regeneration or
End
to end the service function and exit.
Figure 5-25
Sample Regeneration Confirmation Screen
4. A series of instruction screens display for users to perform the particle filter
regeneration step by step. Follow the on-screen instructions and tap the
OK
button
until the tool displays the regeneration status as below.
Figure 5-26
Sample Regeneration Status Screen
