58
NOTE
1. The DPF will not regenerate if the engine management light is on, or there is a faulty
EGR valve.
2. The ECU must be re-adapted when replacing the DPF and when topping up the fuel
additive Eolys.
3. If the vehicle needs to be driven in order to perform a DPF service, a second person
is needed for the function. One person should drive the vehicle while the other
person observes the screen on the Tool. Do not attempt to drive and observe the
scan tool at the same time. This is dangerous and puts your life and the lives of other
motors and pedestrians at risk.
Figure 5-20
Sample DPF Service Function Menu
Starting Basic Inspection Quantity
This function enables start fuel delivery matching.
1. Tap
Starting Basic Inspection Quantity
from the service functions menu to enter
the service screen.
2. The tool communicates with the vehicle and reads the fault codes memory. Follow
the on-screen instructions to finish this procedure.
3. The tool will display a function list menu as below. Press the corresponding number
button to perform the desired function.
Figure 5-21
Sample Starting Basic Inspection Quantity
