80
Select a wheel location on the display and place a MX-Sensor near the top right corner
of the tablet and then tap
Copy by Input
to program the new MX-Sensor.
Tap
Copy by Input
.
When the input box displays, enter the ID of the original sensor. Tap
inside the input box to display a soft keyboard. Once displayed, input the ID and tap
Enter
when finished.
Sensors either have a hexadecimal format or a decimal format. A warning message will
display if too many characters are entered.
The
Copy by Input
programming method uses the ID of the original sensor that is
already stored within the TPMS ECU and therefore does not require the sensor be
relearned if the new programmed sensor has been put in the same position.
Auto Create
The
Auto Create
function is used to automatically create a random sensor ID to program
a new MX-Sensor.
To use this function, there is no need to activate the original sensor or retrieve the original
sensor IDs from the TPMS ECU.
Figure 6-22
Sample Copy by Input Screen
