AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 986 / 1037

CHAPTER 60 Configuration Parameters Reference
Mediant 4000 SBC | User's Manual
Parameter Description
■ [2] = (Default) The device uses the received GARP
packets to change the MAC address of the
transmitted RTP packets.
■ [3] = Options 1 and 2 are used.
Note:
■ For the parameter to take effect, a device reset is
required.
■ If the device is located in a network subnet which
is connected to other gateways using a router that
uses Virtual Router Redundancy Protocol (VRRP)
for redundancy, then set the parameter to 0 or 2.
'Forward Invalid RTP Packets'
[RTPFWInvalidPacketHandling]
Defines the device's handling of invalid RTP and
RTCP packets.
■ [0] Forward Packets = Forwards the invalid
packets as is.
■ [1] Forward Packets and Issue Warnings =
(Default) Forwards the invalid packets and issues
warnings (sent to the Syslog) to notify of the invalid
packets.
■ [2] Drop Packets and Issue Warnings = Drops
the invalid packets and issues warnings to notify of
the invalid packets.
Note:
■ The parameter is applicable only if the IPProfile_
TranscodingMode parameter is configured to
RTP
Forwarding .
'Forward Unknown RTP Payload
Types'
[RtpFWNonConfiguredPTHandling]
Defines the device's handling of RTP packets that are
received with non-configured (unknown) payload
types.
■ [0] Handle as Invalid Packet = (Default) Handles
the packet as an invalid packet, according to the
RTPFWInvalidPacketHandling parameter.
■ [1] Handle as Valid Packet = Handles the packet
as a valid packet.
Note:
■ The parameter is applicable only if the IPProfile_
TranscodingMode parameter is configured to
RTP
Forwarding .
'RTP Base UDP Port'
configure voip > media
rtp-rtcp > base-udp-port
[BaseUDPport]
Global parameter that defines the lower boundary of
the UDP port used for RTP, RTCP (RTP port + 1) and
T.38 (RTP port + 2). For more information on
configuring the UDP port range, see
Configuring RTP
Base UDP Port .
The range of possible UDP ports is 6,000 to 65,535.
The default base UDP port is 6000.
Note: For the parameter to take effect, a device reset
is required.
- 953 -