AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 836 / 1037

CHAPTER 51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Parameter Description
'Title'
title
[SBCCDRFormat_
Title]
Defines a new name for the CDR field (for Syslog or local storage) or for
the RADIUS Attribute prefix name (for RADIUS accounting) that you
selected in the 'Column Type' parameter.
The valid value is a string of up to 31 characters. You can also configure
the name to be enclosed by apostrophes (single or double). For example,
if you want the CDR field name to appear as 'Phone Duration', you must
configure the parameter to 'Phone Duration'. You can also configure the
CDR field name with an equals (=) sign, for example "call-connect-
time=".
Note:
■ For VSA's that do not require a prefix name, leave the parameter
undefined.
■ The parameter's value is case-sensitive. For example, if you want
the CDR field name to be Phone-Duration, you must configure the
parameter to "Phone-Duration" (i.e., upper case "P" and "D").
'RADIUS Attribute
Type'
radius-type
[SBCCDRFormat_
RadiusType]
Defines whether the RADIUS Attribute of the CDR field is a standard or
vendor-specific attribute.
■ [0] Standard = (Default) For standard RADIUS Attributes.
■ [1] Vendor Specific = For vendor-specific RADIUS Attributes
(VSA).
Note: The parameter is applicable only to RADIUS accounting (i.e.,
'CDR Type' parameter configured to RADIUS SBC ).
'RADIUS Attribute
ID'
radius-id
[SBCCDRFormat_
RadiusID]
Defines an ID for the RADIUS Attribute. For VSAs, this represents the
VSA ID; for standard Attributes, this represents the Attribute ID (first
byte of the Attribute).
The valid value is 0 to 255 (one byte). The default is 0.
Note:
■ The parameter is applicable only to RADIUS accounting (i.e., 'CDR
Type' parameter configured to
RADIUS SBC ).
■ For VSA's (i.e., 'RADIUS Attribute Type' parameter configured to
Vendor Specific ), the parameter must be configured to any value
other than 0.
■ For standard RADIUS Attributes (i.e., 'RADIUS Attribute Type'
parameter configured to
Standard ), the value must be a "known"
RADIUS ID (per RFC for RADIUS). However, if you configure the
ID to 0 (default) for any of the RADIUS Attributes (configured in the
'Column Type' parameter) listed below and then apply your rule
(Click
Apply ), the device automatically replaces the value with the
RADIUS Attribute's ID according to the RFC:
✔
Destination Username: 30
✔
Source Username: 31
✔
Accounting Status Type: 40
✔
Local Input Octets: 42
✔
Local Output Octets: 43
✔
Call Duration: 46
✔
Local Input Packets: 47
- 803 -