AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 123 / 1037

CHAPTER 13 Network
Mediant 4000 SBC | User's Manual
● The device provides two MAC addresses for the LAN ports which are allocated as
follows: a MAC address for ports GE_1 through GE_4, and a MAC address for
ports GE_5 through GE_8.
● If you are connecting to the same switch, ports with the same MAC address (e.g.,
GE_1 and GE_3) and belonging to different Ethernet Groups, each of these
Ethernet Groups must have a unique tagged VLAN ID.
The following procedure describes how to configure Ethernet ports through the Web interface. You
can also configure it through ini file [PhysicalPortsTable] or CLI (
configure network >
physical-port
).
➢
To configure the physical Ethernet ports:
1. Open the Physical Ports table ( Setup menu > IP Network tab > Core Entities folder >
Physical Ports ).
2. Select a port that you want to configure, and then click Edit ; the following dialog box appears:
3. Configure the port according to the parameters described in the table below.
4. Click Apply , and then reset the device with a burn-to-flash for your settings to take effect.
Table 13-2: Physical Ports Table Parameter Descriptions
Parameter Description
General
'Index' (Read-only) Displays the index number for the table row.
'Name'
port
[PhysicalPortsTable_
Port]
(Read-only) Displays the Ethernet port number. See the figure in the
beginning of this section for the mapping between the GUI port
number and the physical port on the chassis.
'Description'
port-
description
[PhysicalPortsTable_
PortDescription]
Defines a description of the port.
By default, the value is "User Port #<row index>".
Note: Each row must be configured with a unique name.
'Mode'
mode
(Read-only) Displays the mode of the port.
■ [0] Disable
■ [1] Enable (default)
- 90 -