AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 184 / 1037

CHAPTER 14 Security
Mediant 4000 SBC | User's Manual
Parameter Description
[IDSMatch_SIPInterface] The valid value is the ID of the SIP Interface. The following
syntax is supported:
■ A comma-separated list of SIP Interface IDs (e.g., 1,3,4)
■ A hyphen "-" indicates a range of SIP Interfaces (e.g., 3,4-7
means IDs 3, and 4 through 7)
■ A prefix of an exclamation mark "!" means negation of the set
(e.g., !3,4-7 means all indexes excluding 3, and excluding 4
through 7)
'Proxy Set IDs'
proxy-set
[IDSMatch_ProxySet]
Assigns a Proxy Set(s) to the IDS Policy. This indicates the
Proxy Sets from where the attacks are coming from. The
following syntax is supported:
■ A comma-separated list of Proxy Set IDs (e.g., 1,3,4)
■ A hyphen "-" indicates a range of Proxy Sets (e.g., 3,4-7
means IDs 3, and 4 through 7)
■ A prefix of an exclamation mark "!" means negation of the set
(e.g., !3,4-7 means all indexes excluding 3, and excluding 4
through 7)
Note:
■ Only the IP address of the Proxy Set is considered (not port).
■ If a Proxy Set has multiple IP addresses, the device
considers the Proxy Set as one entity and includes all its IP
addresses in the same IDS count.
'Subnet'
subnet
[IDSMatch_Subnet]
Defines the subnet to which the IDS Policy is assigned. This
indicates the subnets from where the attacks are coming from.
The following syntax can be used:
■ Basic syntax is a subnet in CIDR notation (e.g., 10.1.0.0/16
means all sources with IP address in the range 10.1.0.0–
10.1.255.255)
■ An IP address can be specified without the prefix length to
refer to the specific IP address.
■ Each subnet can be negated by prefixing it with "!", which
means all IP addresses outside that subnet.
■ Multiple subnets can be specified by separating them with
"&" (and) or "|" (or) operations. For example:
✔
10.1.0.0/16 | 10.2.2.2: includes subnet 10.1.0.0/16 and
IP address 10.2.2.2.
✔
!10.1.0.0/16 & !10.2.2.2: includes all addresses except
those of subnet 10.1.0.0/16 and IP address 10.2.2.2.
Note that the exclamation mark "!" appears before each
subnet.
✔
10.1.0.0/16 & !10.1.1.1: includes subnet 10.1.0.0/16,
except IP address 10.1.1.1.
'Policy'
policy
[IDSMatch_Policy]
Assigns an IDS Policy (configured in Configuring IDS Policies ).
- 151 -