AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 216 / 1037

CHAPTER 15 Media
Mediant 4000 SBC | User's Manual
DTLS cipher suite reuses the TLS cipher suite. The DTLS handshake is done for every new call
configured for DTLS. In other words, unlike TLS where the connection remains "open" for future
calls, a new DTLS connection is required for every new call. Note that the entire authentication and
key exchange for securing the media traffic is handled in the media path through DTLS. The
signaling path is used only to verify the peers' certificate fingerprints. DTLS messages are
multiplexed onto the same ports that are used for the media.
➢
To configure DTLS:
1. In the TLS Context table (see Configuring TLS Certificate Contexts ), configure a TLS Context
with the DTLS version (TLSContexts_DTLSVersion).
2. Open the IP Groups table (see Configuring IP Groups ) and for the IP Group associated with the
SIP entity, assign it the TLS Context for DTLS, using the 'DTLS Context' parameter (IPGroup_
DTLSContext).
3. Open the IP Profiles table (see Configuring IP Profiles ) and for the IP Profile associated with
the SIP entity, configure the following:
● Configure the 'SBC Media Security Mode' parameter (IPProfile_
SBCMediaSecurityBehavior) to
SRTP or Both .
● Configure the 'Media Security Method' parameter (IPProfile_SBCMediaSecurityMethod)
to
DTLS .
● Configure the 'RTCP Mux' parameter (IpProfile_SBCRTCPMux) to Supported .
Multiplexing is required as the DTLS handshake is done for the port used for RTP and
thus, RTCP and RTP must be multiplexed onto the same port.
● Configure the ini file parameter, SbcDtlsMtu (or CLI command configure voip > sbc
settings > sbc-dtls-mtu) to define the maximum transmission unit (MTU) size for the DTLS
handshake.
● The 'Cipher Server' parameter must be configured to "ALL".
● The device does not support forwarding of DTLS transparently between endpoints.
- 183 -