AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 589 / 1037

CHAPTER 25 Routing SBC
Mediant 4000 SBC | User's Manual
Parameter Description
■ If you configure the parameter to Dest Address , Request URI ,
ENUM , Dial Plan or LDAP , you must specify a destination IP
Group using the 'Destination IP Group' parameter, even though
these calls are
not sent to the specified IP Group (i.e., its
associated Proxy Set). This allows you to associate other
configuration entities (such as an IP Profile) that are assigned to
the IP Group, with the destination of these calls. If you do not
specify a destination IP Group, the device uses its own logic in
choosing a destination IP Group (and thus its associated
configuration entities) for the routing rule.
■ You can configure up to 20 IP-to-IP Routing rules whose
'Destination Type' is
Internal .
'Destination IP Group'
dst-ip-group-
name
[IP2IPRouting_
DestIPGroupName]
Defines the IP Group to where you want to route the call. The actual
destination of the SIP dialog message depends on the IP Group type
(as defined in the 'Type' parameter):
■ Server-type IP Group: The SIP dialog is sent to the IP address
configured for the Proxy Set that is associated with the IP
Group.
■ User-type IP Group: The device checks if the SIP dialog is from
a registered user, by searching for a match between the
Request-URI of the received SIP dialog and an AOR registration
record in the device's database. If found, the device sends the
SIP dialog to the IP address specified in the database for the
registered contact.
By default, no value is defined.
Note:
■ The parameter is applicable only if the 'Destination Type'
parameter is configured to
IP Group . However, you also need to
specify this parameter if the 'Destination Type' parameter is
configured to
Dest Address , Request URI , ENUM , Dial Plan
or LDAP (even though these calls are not sent to the specified
IP Group). For these cases, it allows you to associate other
configuration entities (such as an IP Profile) that are assigned to
the IP Group, with the destination of these calls.
■ The selectable IP Group for the parameter depends on the
assigned Routing Policy (in the 'Routing Policy' parameter in
this table). For more information, see
Configuring SBC Routing
Policy Rules .
'Destination SIP
Interface'
dest-sip-
interface-name
[IP2IPRouting_
DestSIPInterfaceNam
e]
Defines the destination SIP Interface to where the call is sent.
By default, no value is defined.
To configure SIP Interfaces, see Configuring SIP Interfaces .
Note:
■ The parameter is applicable only if the 'Destination Type'
parameter is configured to any value other than IP Group . If the
'Destination Type' parameter is configured to IP Group , the
following SIP Interface is used:
✔
Server-type IP Groups: SIP Interface that is assigned to the
Proxy Set associated with the IP Group.
- 556 -