AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 138 / 1037

CHAPTER 13 Network
Mediant 4000 SBC | User's Manual
3. Configure a static route according to the parameters described in the table below. The address
of the host/network you want to reach is determined by an AND operation that is applied to the
fields 'Destination' and 'Prefix Length'. For example, to reach network 10.8.x.x, enter
"10.8.0.0" in the 'Destination' field and "16" in the 'Prefix Length'. As a result of the AND
operation, the value of the last two octets in the 'Destination' field are ignored. To reach a
specific host, enter its IP address in the 'Destination' field and "32" in the 'Prefix Length' field.
4. Click Apply , and then save your settings to flash memory.
You can only delete static routing rules that are inactive.
Table 13-6: Static Routes Table Parameter Descriptions
Parameter Description
'Index'
[StaticRouteTable_
Index]
Defines an index number for the new table row.
The valid value is 0 to 29.
Note: Each row must be configured with a unique index.
'Description'
description
[StaticRouteTable_
Description]
Defines a name for the rule.
The valid value is a string of up to 20 characters.
'Destination'
destination
[StaticRouteTable_
Destination]
Defines the IP address of the destination host/network. The destination
can be a single host or a whole subnet, depending on the prefix length
configured for this routing rule.
'Prefix Length'
prefix-length
[StaticRouteTable_
PrefixLength]
Defines the Classless Inter-Domain Routing (CIDR)-style
representation of a dotted-decimal subnet notation of the destination
host/network. The CIDR-style representation uses a suffix indicating
the number of bits that are set in the dotted-decimal format. For
example, the value 16 represents subnet 255.255.0.0
The valid value depends on the IP address version:
■ IPv4: 0 to 32
- 105 -