AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 718 / 887

Program Extension
Centralized Telephone Programming
5–3
2 Select Centralized Programming.
System Programming
Make a selection
Labeling
Data
Print
_
Cntr-Prg
Exit
4
3 Select a programming option.
Centralized Programming:
Make a selection
_
Program Ext
_
Copy Ext
Select
Program Ext
or
1
Exit Enter Copy Ext
.
2
4 Go to the appropriate section.
The following sections explain the use of menu selections for programming a
single extension (Program Extension), and for using one extension as a template
for programming several extensions of the same type (Copy Extension).
NOTE:
It is recommended that you use the programming codes for centralized
programming; however, you may also use the
List Features
option that is
available on the programming screen. See “Using the List Feature Menu” for
details about this option.
Program Extension
Review the items below before you begin to program extensions.
■
Use Table 5–1 to locate the code for the feature that you want to program.
■
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the button, a beep sounds or the message
Programming
Error
appears and the green LED next to the button flashes. If this
happens, press the button again and repeat the procedure.