AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 250 / 887

Optional Group Features
3–114
Common Administrative Procedures
Console Display/Instructions Additional Information PC
6 Specify the extension.
Group Page xxxx:
xxxx = number entered in Step 4
Enter extensions
If no DSS is attached :
SP: “Entering an Extension”
Û
Delete
Backspace Next
If DSS is attached :
Exit Enter
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is included in paging
group.
Off = extension is not included in paging
group.
7 Assign or remove the extension from the paging group.
Select
Enter Enter
or
0
Delete
Delete
.
8
You may continue to assign or remove
extensions from the paging group by
repeating Steps 5 and 6.
8 Continue to assign the extension to another paging group or go to Step 9.
Select
Next Next
9
Return to Step 6 to continue programming. The
next paging group will be displayed on Line 1.
9 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Group Coverage Member Assignments
Use this procedure to assign or remove an extension from a coverage group. A
coverage group is a group of senders. Coverage is an arrangement in which
calls from a group of senders are redirected to one or more receivers.
NOTE:
This procedure assigns senders . Before you begin, make certain that the
receivers for the coverage group are also programmed. Receivers can be
assigned through individual or centralized telephone programming. You can also
use the Integrated Solution II/III feature, Integrated Administration, to assign
coverage receivers. See Chapter 5, “Centralized Telephone Programming,” for
information about the appropriate centralized programming procedure.
A maximum of 30 coverage groups are allowed, each with an unlimited number
of members. Up to eight receivers can be assigned per coverage group.