AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 509 / 887

PRI Facilities
Programming Procedures
4–137
●
Single Line Procedure
Console Display/Instructions Additional Information PC
1 Specify entry mode.
Select
Entry Mode Entry Mode
.
6
2 Enter a line number.
B-Channel Group xx:
xx = number entered in Step 12
Enter line number
Delete
Backspace Next
Exit Enter
Dial or type [ nnn ].
Û
3 Assign or remove the line number from the B-channel group.
Select
Enter
Enter
or
0
Delete Delete
.
8
You may continue to assign or remove
additional lines from the B-Channel group
by repeating Steps 7 and 8.
4 Continue to assign the line number to another B-channel group or go to Step 5.
Select
Next
Next
.
9
Return to Step 2. The next group will be
displayed on Line 1.
5 Save your entry.
Select
Enter Enter
.
0
6 Return to the System Programming menu.
Select
Exit Exit
three times.
555
◆
Block Procedure
1 Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select
Lines 01-20 Lines 01-20
1
Lines 21-40
Lines 21-40
2
Lines 41-60 Lines 41-60
3
Lines 61-80 Lines 61-80
.
4
2 Assign the line(s) to the B-channel group.
Toggle the green LED on or
off as required.
On = lines are assigned to B-channel.
Off = lines are not assigned to B-channel.
3 Return to the System Programming menu.
Select
Exit Exit
three times.
555