AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 518 / 887

PRI Facilities
4–146
Programming Procedures
Console Display/Instructions Additional Information PC
9 Save your entry.
Select
Enter Enter
.
0
10 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Telephone Number to Send
Use this procedure to assign the telephone number to send to the network when
outgoing calls are made on an ISDN line. If the person being called subscribes
to an automatic number identification service, the number indicates who is
calling.
The number assigned to each channel does not have to be unique because it is
not used for routing.
The telephone number sent to the network can be the one of the following:
■
The extension number assigned to the calling telephone (Select
Extension Only
in Step 4)
■
The extension number substituted into the lower order digits of a
system-wide base number (Select
Base Number with Ext
in Step 4)
■
The facility-based line telephone number (Select
Line Telephone Number
in Step 4)
NOTE:
Only one base number is supported per system. In systems having non-uniform
extension numbers, for example, where there are some 3-digit extension
numbers and some 4-digit extension numbers, one base number may not be
sufficient to represent all the external telephone numbers of all extensions.
Summary: Telephone Number to Send
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Factory Setting No digits are assigned
Valid Entries Up to 12 digits (any combination of 0 to 9)
Inspect No
Copy Option No