AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 263 / 887

Optional Group Calling Features
Common Administrative Procedures
3–127
Console Display/Instructions Additional Information PC
5 Enter the extension number of the calling group.
Group Calling:
Enter extension number
of group
Backspace
Exit
Enter
Dial or type [ nnnn ].
Û
6 Save your entry.
Select
Enter Enter
.
0
7 Specify the hunt pattern.
Group Calling xxxx:
xxxx = number entered in Step 5
Select one
_
Circular
_
Linear
Next
Select
Circular Circular
or
1
Exit Enter Linear Linear
.
2
8 Continue to assign a hunt pattern to another calling group or go to Step 9.
Select
Next Next
9
Return to Step 7 to continue programming. The
next calling group will be displayed on Line 1.
9 Save your entry.
Select
Enter Enter
.
0
10 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Group Calling Delay Announcement
Use this procedure to designate the announcement device used to play
messages to callers while they are waiting in the queue.
Only one announcement device can be designated for each calling group;
however, more than one calling group can use the same announcement device.
The extension to which the delay announcement device is connected should not
be programmed as a calling group member.
If the extension jack or MFM was previously programmed as a regular extension,
you must remove all line/trunk button assignments before you designate the
extension jack as a delay announcement device.