AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 161 / 887

System Operator Positions
Common Administrative Procedures
3–25
Console Display/Instructions Additional Information PC
3 Select Direct-Line Console (DLC).
System Operator:
If you get the System Busy message, wait
Make a selection
for an idle condition or exit system
_
Direct Line
programming and try again later.
Queued Call
Exit
1
4 Specify the DLC extension.
DLC Operator Positions:
If no DSS is attached:
Enter extension
SP: “Entering an Extension”
Û
If DSS is attached:
Store All Delete
Toggle the red LED on or
Backspace
off as required. Go to Step 6.
Exit Enter
On = extension is currently assigned
as a DLC position.
Flashing = extension can be assigned
as a DLC position.
Off = extension cannot be assigned
as a DLC position.
5 Assign or remove the DLC operator extension.
Select
Enter Enter
or
0
Delete Delete
.
8
You may continue to assign or remove
DLC operator positions by repeating
Steps 4 and 5.
6 Indicate that you have finished entering all positions.
Select
Store All Store All
.
3
The session is terminated, and the system
restarts. You must enter system
programming again to continue.