AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 184 / 887

QCC Optional Features
3–48
Common Administrative Procedures
Console Display/Instructions Additional Information PC
4 Specify the QCC operator extension.
Operator Message Center:
If no DSS is attached :
Enter QCC operator
SP: “Entering an Extension”
Û
extension number
If DSS is attached :
Delete
Toggle the red LED on or
Backspace
off as required.
Exit Enter
On = extension is message center
position.
Flashing = extension is not message
center position.
Off = extension is not an operator position.
5 Assign or remove the extension as a message center.
Select
Enter Enter
or
8
Delete Delete
.
0
You may continue to assign or remove
extensions as a message center by
repeating Steps 4 and 5.
6 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Extended (Directed) Call Completion
Use this procedure to specify one of the two basic options shown below for QCC
operator positions with a DSS only:
■ Automatic Completion. Allows one-touch call transfer; that is, calls are
transferred by touching only an extension button on the DSS. The
operator does not have to press the
Release button.
■
Manual Completion. QCC operators must press the Release button to
direct a call using a DSS.
This option cannot be programmed for individual QCC operator positions. The
setting applies to all QCC operator positions.
Summary: Extended (Directed) Call Completion
Programmable by System manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 6a, Optional Operator Features
Factory Setting Automatic Extended Completion