AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 376 / 887

Basic System Operating Conditions
4–4
Programming Procedures
If you are programming on the console, be aware of the following:
■
The console must be connected to the extension currently assigned for
system programming.
■
As soon as you change the system programming extension, the system
programming session is terminated. To proceed with system
programming, you must connect the system programming console to the
newly assigned extension and enter system programming again.
NOTE:
The telephone used for system programming must be an MLX-20L.
See Chapter 3, “Common Administrative Procedures” for detailed information.
Summary: System Programming Position
Assignment
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 1, System Planning
Factory Setting First extension jack on the first MLX module (also set as an
operator position)
Valid Entries Extension number of one of the first five extension jacks on
the first MLX module
Inspect No
Copy Option No
Console Procedure
System
®
SProg Port
®
Drop
®
Dial ext. no.
®
Enter
®
Exit
PC Procedure
1
®
2
®
A
+
P
®
Type ext. no.
®
0
®
5
System Language
Use this procedure to set the system language (English, French, and Spanish)
for the following options:
■
System language.
■
Station Message Detail Recording (SMDR) reports. See “System
Features.”
■
Print reports. See “Printing Reports.”
■
Extensions. See “Optional Telephone Features.”