AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 34 / 887

Programming Procedures
1–18
Programming Basics
l l
Single Line Procedure
Console Display/Instructions Additional Information PC
1 Specify entry mode.
Select
Entry Mode Entry Mode
.
6
2 And so on ...
3 Return to Step 6 of the main procedure.
u u
Block of Lines Procedure
1 Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select
Lines 01-20 Lines 01-20
1
Lines 21-40 Lines 21-40
2
Lines 41-60 Lines 41-60
3
Lines 61-80 Lines 61-80
4
2 And so on ...
3 Return to Step 6 of the main procedure.
Saving Entries and Moving Among Screens
At the bottom of each screen, there are one or more screen keys with functions
that allow you to change your entry, save your entry, or return to a previous
screen. Various combinations of these screen keys appear on each
programming screen. Figure 1–10 shows the QCC Priority screen with a typical
display of screen keys.
QCC Priority x:
x = QCC Priority entered in earlier Step
Enter line/trunk number
xxx
xxx = line/trunk number (801-880)
Delete
8
4
Backspace Next
9
5
Exit Enter
0
Figure 1–10. Screen Keys
The PC keys that correspond to the screen key selections are shown here for
quick reference. These PC keys do not appear on the console display screen.
Table 1–2 contains details on the use of the screen keys.