AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 419 / 887

Lines and Trunks
Programming Procedures
4–47
Console Display/Instructions Additional Information PC
6 Specify the QCC priority lines.
● ◆
QCC Priority xx:
x = QCC queue priority entered in Step 4
Enter line/trunk number
_
Lines 01-20 Entry Mode
_
For a single line, go to
_
Lines 21-40
●
Single Line Procedure.
_
Lines 41-60
_
Lines 61-80
For a block of lines, go to
Exit
◆
Block Procedure.
●
Single Line Procedure
1 Specify entry mode.
Select
Entry Mode Entry Mode
.
6
2 Enter the line or trunk with the specified queue priority.
QCC Priority x:
Enter line/trunk number
Dial or type:
Û
Delete
Trunk number [ nnn ]
Backspace Next
Slot and port number
*
[ sspp ]
Exit Enter
Logical ID number
#
[ nnn ].
3 Assign or remove the line/trunk from the specified QCC priority level.
Select
Enter Enter
or
0
Delete
Delete
.
8
You may continue to assign or remove the
QCC priority level from additional
lines/trunks by repeating Steps 2 and 3.
4 Continue to assign or remove lines or trunks, or go to Step 5.
Select
Next Next
.
9
Return to Step 2. The next QCC priority
level will be displayed on Line 1.
5 Save your entry.
Select
Enter Enter
.
0
6 Return to the System Programming menu.
Select
Exit Exit
two times.
55