AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 153 / 887

System Renumbering
Common Administrative Procedures
3–17
Console Display/Instructions Additional Information PC
9 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Block Renumbering
Use this procedure to assign extension numbers to a group of extensions,
accessories, or lines. Both the original numbers and the numbers they are being
changed to must be sequentially numbered.
When required, this procedure should be performed immediately following the
selection of a system numbering plan.
!
CAUTION:
Select
Exit
on the console or
5
on the PC when you have finished
renumbering extensions. If you press Home , extensions may remain in the
forced idle condition (indicated when the LED next to each DSS button is
on). To restore extensions to their normal operating state, restart the
system.
Summary: Block Renumbering
Programmable by System manager
Mode All
Idle Condition System idle
Planning Form Form 2a, System Numbering: Extension Jacks
Form 2b, System Numbering: Digital Adjuncts
Form 2d, System Numbering: Special Renumbers
Factory Setting Not applicable
Valid Entries Old and new extension numbers
Inspect Yes
Copy Option Yes
Console Procedure
SysRenumber
®
Block
®
Select type of group
®
Dial no. of
first group member
®
Enter
®
Dial no. of last group
member
®
Enter
®
Dial new beginning no.
®
Enter
®
Exit
®
Exit
®
Exit
PC Procedure
2
®
3
®
Select type of group
®
Type no. of first group
member
®
0
®
Type no. of last group member
®
0
®
Type new beginning no.
®
0
®
5
®
5
®
5