AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 30 / 887

Programming Procedures
1–14
Programming Basics
Using the Programming Procedures
This section contains specific information about how to make the best use of the
programming procedures. Make certain that you read and understand the
information presented here before you begin any system programming
procedures.
Format
The programming procedures are presented as numbered steps in the format
shown below.
Console/Display Instructions Additional Information PC
1 The step instruction is shown here.
Console Display
_
Press here
On the PC, press the function key that
appears in the
PC
column.
è
*
2 Enter the B-channel group number ( nn = 1 to 69).
Enter B-Channel Groups:x
x = B-channel entered in Step 1
Enter the group number:
Dial or type [ nn ].
Û
The Gray Bar
The gray bar contains the step number and instructions. The gray bar may also
contain symbols that direct you to a branch procedure. (see “Branching”).
Sometimes, the gray bar contains data entry information, which follows the step
instruction and is shown in parentheses. You use the (
nn = ) value in the gray
bar to replace the variable [nn] in the instruction. For example, in sample Step 2
the parenthetical statement (
nn = 1 to 69) indicates that 1 through 69 are
acceptable entries for the group number that you dial or type.
An empty gray bar signals the end of a main procedure.